automotive voltage drop testing
ThomasNet Industrial Newsroom - Today's New Product News
ThomasNet Industrial Newsroom is a service of ThomasNet.com
- Analyzer determines dependability of data cartridges.
Helping businesses store critical data with confidence, Maxell LTO Cartridge Memory Analyzer tests quality of data storage cartridges by reading information stored on memory chip and determining whether cartridge is intact or has deteriorated. Businesses can create their own parameters for cartridge quality using single score number that is calculated from all available data. Cartridges that do not meet standards set by user can be identified and discarded.
This story is related to the following:
Waterjet Machining Center offers Rotary Axis accessory.
When equipped with Rotary Axis, JetMachining® Center cuts X/Y/Z paths to create complex 3D parts with incremental index rotations from pre-existing CAD/DXF files. Rotary Axis is suited for cutting pipe, circular, or square stock materials and designed with multiple mounting features on output drive shaft. Users can position head in various locations in tank and attach customized fixtures. Fully submergible, rotary head contains built-in water drip sensor.
This story is related to the following:
Flexible Beam Couplings clamp with single screw on each end.
Machined from single piece of aluminum, zero-backlash Beam Couplings feature both radial and cross-cut to optimize surface contact with shaft. Multiple spiral cuts provide torsional stiffness and allow couplings to accommodate angular misalignment, parallel misalignment, and axial motion. Available in 20 body sizes, couplings feature outside diameters from 3/8-1½ in. and bores from 3/32-¾ in. Stainless steel models are also available for corrosion resistance.
This story is related to the following:
Switching Control targets high-voltage circuit breakers.
Housed in NEMA 1 enclosure, Switching Control Sentinel(TM) enables synchronized closing or opening of independent pole operated circuit breakers. Smart Grid capable, device provides digital communication capabilities, as well as microprocessor-based condition monitoring of breaker's synchronous performance. Detailed waveforms are stored for last 20 operations in non-volatile flash memory. As Smart Grid interoperability standards evolve, firmware can be flash-updated in field via serial port.
This story is related to the following:
Wireless Protocol Stack runs natively on µClinux.
Natalie DECT and CAT-iq protocol software stack reduces number of ICs needed for cordless telephony-enabled VoIP solutions. In addition to enabling re-use of available open-source code to accelerate application development, it lets users run DECT stack and VoIP software on same processor. Solution also broadens mobility options for VoIP, allowing cordless handsets or headsets to seamlessly link to VoIP networks while maintaining voice quality associated with DECT/CAT-iq.
This story is related to the following:
Surge Protectors safeguard medical equipment and facilities.
Available in 40 and 80 mm modules with ratings of 140 and 200 kA, respectively, Strikesorb® provides continuous protection from lightning strikes, temporary overvoltage events, and transient voltage activity. Fuseless modules are each comprised of single distribution-grade metal oxide disc that delivers uniform distribution of surge current over total area of MOV protection element. Units are resistant to repeated surges and do not experience degradation over time.
This story is related to the following:
Microwatt Laser leverages MOFA architecture.
PicoSpark(TM) combines Passively Q-Switched (PQS) microchip laser technology with fiber amplification, resulting in multi-watt laser that generates picosecond pulses with hundreds of kilowatt peak power. Master Oscillator Fiber Amplifier (MOFA) architecture allows pulse width to stay constant, while user can vary pulse energy (or peak power) and repetition rate independently of each other. Requiring 350 W, versions are available at 1,064, 532, and 355 nm.
This story is related to the following:
Banding System enables ties of any length.
Unlike smooth plastic banding that must be connected with steel buckles, Q-Band® is designed with teeth that allow connecting clip to grip band. Q-Band® is adjustable and reusable, and since clip is not pre-connected to band, ties of any length are possible. Made of polypropylene with fiber reinforcement, Q-Band is suited for HVAC, insulation, electrical, chemical, and maritime industries.
This story is related to the following:
Fasteners and Hardware Sponsored by: Superior Washer - Industry's Largest, Most Comprehensive Inventory Of Washer Products
Mechanical Components and Assemblies
Search for suppliers of: